Farm Telehandler Guide: Handling Palletized Feed, Fertilizer and Materials at Height
Some farm material-handling jobs require more than simply lifting a load from the ground.
Palletized feed, seed, fertilizer and other agricultural supplies may need to be unloaded from trucks, moved across the yard and placed at different heights.
A telehandler combines forklift-style material handling with a telescopic boom, making height and forward reach important parts of the selection process.
When Does a Farm Need a Telehandler?
A telehandler becomes useful when loads need to be moved both horizontally and vertically.
For simple ground-level pallet movement on smooth concrete, a conventional forklift may be sufficient.
For applications involving outdoor yards, elevated placement or obstacles between the machine and load destination, a telehandler may provide a better working envelope.
Palletized Feed and Seed
Large farms may receive feed ingredients, seed and other agricultural supplies on pallets.
A telehandler can move suitable palletized loads between delivery areas and storage locations when the weight and load center fall within the approved load chart.
Fertilizer and Packaged Agricultural Supplies
Bagged fertilizer and other packaged products often arrive in palletized form.
The telehandler can help unload and reposition these loads around prepared farm yards.
The load must remain stable and properly supported on the forks.
Working at Height
One of the main advantages of a telehandler is the ability to place materials at greater height than a conventional low-mast material-handling machine.
The required height should be measured before choosing the model.
Forward Reach
Forward reach becomes useful when the machine cannot position directly under the load destination.
However, increasing boom extension changes stability and available lifting capacity.
The machine load chart must therefore be used for every relevant boom position.
KLIONCE KL2506T
The KLIONCE KL2506T telehandler provides a 2500 kg rated load with a listed rated lift height of 6000 mm and maximum reach of 2160 mm.
It uses a 4WD configuration for outdoor mobility.
KL2506T Main Specifications
Rated load: 2500 kg
Operating weight: approximately 5800 kg
Engine power: 58 kW
Rated lift height: 6000 mm
Maximum reach: 2160 mm
Drive mode: 4WD
Fork length: 1220 mm
Wheelbase: 2800 mm
Ground clearance: 230 mm
Maximum gradeability: ≤50%
Maximum travel speed: 35 km/h
Overall dimensions: approximately 5220 × 2020 × 2050 mm
Cab safety standard: FOPS
2500 kg Is Not Available Everywhere in the Working Envelope
The rated-load figure should not be interpreted as a guarantee that the machine can lift 2500 kg at maximum height or maximum forward reach.
Available capacity changes with boom position, load center and attachment configuration.
The delivered machine load chart is the correct reference.
4WD Helps Outdoor Mobility
Four-wheel drive is useful on prepared farm tracks and yards where the surface may differ from smooth warehouse concrete.
It does not make unstable, waterlogged or excessively soft ground automatically suitable for lifting.
230 mm Ground Clearance
The listed ground clearance can help when comparing machines for outdoor use.
Ground bearing capacity remains important because the machine operating weight is approximately 5800 kg before adding a load.
Bale Handling Requires the Right Attachment
Hay or straw bales should not simply be handled as if they were conventional pallets.
If bale handling is required, the buyer should confirm an approved attachment and the resulting load capacity for that configuration.
Maximum Speed Is Not Loaded Working Speed
The listed maximum travel speed of 35 km/h is a machine specification.
Actual travel speed should be reduced according to boom position, load, surface condition, visibility and site traffic.
Farm Yard Planning
Measure gateways, storage-building entrances and turning space before selecting the machine.
The KL2506T has overall dimensions of approximately 5220 × 2020 × 2050 mm, so access should be confirmed rather than assumed.
Five Questions Before Buying a Farm Telehandler
What is the heaviest normal load?
What is the required lifting height?
How much forward reach is needed?
What ground surfaces will the machine use?
Which forks or approved attachments are required?
Select the Telehandler Around the Whole Farm Workflow
A farm telehandler is most useful where the same machine needs to travel around an outdoor yard and place loads at different heights.
For purely ground-level work or continuous bulk loading, another equipment category may provide a better fit.
Explore the KLIONCE forklift and telehandler range or visit the KLIONCE homepage.